113dB Wireless Bicycle Anti-Theft Vibration Alarm with Remote Control
Although installing a chain lock on your motorcycle is a smart technique to prevent theft, a sophisticated security system is a superior choice to deter opportunistic burglars. The113dB Wireless Bicycle Anti-Theft Vibration Alarm with Remote Control will successfully deter criminals by drawing attention to themselves through their incredibly loud sound.
113dB Loud Alarm
Effectively deter potential burglars with an alarm that may be as loud as 113dB. Good performance from a well-made alarm. Don’t worry if the alarm is too quiet or too loud with the three-lever volume adjustment.
- Arming and disarming
- Adjusting touch sensitivity
- Select bell sound.
- One-key find a vehicle.
- SOS functions
- Battery low indicate
Remote Control Function
It is simple to search your vehicle outdoors within a range of 66 feet, and an alert will sound when you touch the ringtone key.
When an accident occurs, the SOS emergency aid function might ring to alert others to the need for assistance. Also, when your bicycle tilts more than 45 degrees, the alarm will sound automatic to alert you to call for assistance.
7 Levels Adjustable Sensitivity
You may easily alter the sensitivity to your needs with the 7-level adjustable range from gentle touch to push or beat. Also, the remote control range up to 20 meters (66 feet), wireless operation, simple to use.
Simple & Convenient Remote Control Operation
Arm key: Once pressed, the host alarm enters “Arm mode” and rings “Bi” five seconds later. In the event of shaking or tremor, the alarm will sound.
Disarm key: When you push this key, the alarm will exit “Arm mode” and go back into “standby mode”. The alarm sound will immediately stop, regardless of whether the host alarm has been triggered.
Change key: 6 different ringtones are available when you press this key.
Ringtone key: If you hit this key, the specified ringtone will be played as an alarm, making it simple to locate your bicycle.
3D Motion Sensing Alarm
In response to vibration, this 113dB Wireless Bicycle Anti-Theft Vibration Alarm with Remote Control rings. Upon being moved, the alarm will ring for 30 seconds or until it stops and will be audible upon being bumped.
It is simple to set up and utilize this anti-theft alarm. Clean and dry the preferred mounting surface first. Second, put glue on the alarm’s back and set it where you want it. Alternatively, you can run cable ties through the brackets behind the alarm and tie them around whatever you like.
This gadget is not just for bicycle alarms. It is frequently used on bicycles, electric bicycles, motorbikes, self-balancing scooters, doors, and windows. Moreover, you can use this device practically everywhere thanks to its IP55 water resistance and the possibility to connect it with adhesive or cable ties. Use them as trailer alarms, fence alarms, window alarms, and more to increase security.
- Alarm Battery: 3x AAA
- Baterai Remote: 1x 12V/27A
- Wireless range: 66ft/20m
- Dimensi Alarm (P x L x T): 3.73×1.65×0.91 inci// 94.85x42x23.2mm
- Remote dimensions (W x W x H): 2.41×1.18×0.5 inch// 61.4x30x12.6mm
- Waterproof: IP55
- Standby life time: more than 6-10 months.
- Alarm volume:113dB(The distance is 30cm)
- 7 levels of vibration sensitivity can be adjusted
- Working environment temperature: -20~60°C
- Detector Mode: Three-dimensional gyroscope chip detector sensor